Powder Transfer Pumps
Introduction
DJ Powder Transfer Pump – Transfer and convey your dry powders faster and cleaner.
Application Conditions
-
Powder must be lightweight, dry, and non-caking.
-
Particle size smaller than 75 μm (over 200 mesh).
-
Bulk density less than 800 kg/m³.
Operating Requirements
-
Fluidizing air pressure: Can be set from 1.0 to 5.5 bar depending on powder fluidity. (Controlled via a small regulator filter for the auxiliary gas in the liquid chamber.)
-
Working air pressure: Can be set from 1.5 to 6.0 bar depending on required transfer volume. (Controlled via a large regulator filter.)
-
Inlet: Maximum horizontal distance is 3–8 meters, depending on pump size.
-
Outlet: The smaller the bulk density, the higher the conveying height, up to a maximum of 30 meters (straight pipeline without bends).
Features & Advantages
-
Replaces manual powder handling
-
Reduces air pollution – transfers powder directly from the container to where it is needed
-
Unique air conveying system prevents powder clogging
-
Economical and simple – no need for large complex systems
-
Leak-free: Excellent sealing ensures no powder leakage, preventing operator exposure
-
Low shear: Minimal material agitation to avoid heat generation
-
Portable: Can be quickly moved from one location to another